ENGINE
| Net Power Range (Tier 4) | 139 HP |
| Standard Capability | 122 °F |
| Number of Cylinders | 6 |
| Derating Altitude (AWD) | 5499 ft |
| Torque Rise - ISO 9294 | 42% |
| Note (2) | Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Displacement | 427.8 in³ |
| Derating Altitude | 9842.5 ft |
| Maximum Torque - ISO 9249 | 606 lb/ft |
| All-Wheel Drive Net Power Range (Tier 3) | 130 HP |
| Net Power Range (Tier 3) | 130 HP |
| Note (3) | Power as declared per ISO 14396 |
| Bore | 4.1 in |
| Engine RPM | 2,000 |
| Maximum Torque - AWD On | 611 lb/ft |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." |
| Engine Model | Cat 7.1 |
| Stroke | 5.3 in |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA |
MACHINE WEIGHT
| Lever/Steering Wheel Weight* Tier 4 | 35067 lb |
| Joystick All-Wheel Drive (AWD) Weight* Tier 4 | 36846 lb |
| Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 | 36731 lb |
| Note (1) | *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
| Joystick Weight* Tier 4 | 35358 lb |
DIMENSIONS
| Basic Blade Width | 12 ft |
| Length of Machine* | 387 in |
| Width All Wheel Drive (AWD) | 2551 mm |
| Width | 102 in |
| Note | *Typically equipped with push block and ripper. |
| Maximum Height | 151 in |
BLADE RANGE
| Maximum Depth of Cut | 30.5 in |
| Moldboard Side Shift Left | 20.1 in |
| Circle Center Shift Left | 26 in |
| Blade Tip Range Backward | 5 |
| Maximum Lift Above Ground | 16.1 in |
| Circle Center Shift Right | 26 in |
| Blade Tip Range Forward | 40 |
| Maximum Shoulder Reach Right | 76 in |
| Moldboard Side Shift Right | 26.1 in |
| Maximum Shoulder Reach Left | 69.4 in |
SERVICE REFILL CAPACITIES
| Engine Crankcase | 4.8 gal (US) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 5 gal (US) |
| Hydraulic System | 25.6 gal (US) |
| Fuel Tank | 65 gal (US) |
| Transmission and Differential | 9 gal (US) |
| Circle Drive | 1.8 gal (US) |
| Cooling System | 14 gal (US) |
MOLDBOARD
| Arc Radius | 16.3 in |
| End Bit | 6 in |
| Cutting Edge | 6 in |
| Blade Width | 12 ft |
| Blade Height | 24 in |
| Throat Clearance | 4.1 in |