CAT® 236D3 Skid Steer Loader <br> Starting From EGP  682,081

CAT® 236D3 Skid Steer Loader
Starting From EGP 682,081

Vendor
Caterpillar
ENQUIRE FOR PRICE
Sold out
Unit price
per 

ENGINE

Gross Power - SAE J1995 74.3 HP
Net Power - SAE 1349 73.2 HP
Displacement 203 in³
Stroke 4.7 in
Bore 3.7 in
Net Flywheel Power 73.2 HP
Engine Model Cat 3.3B DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995 195 ft·lbf
Net Power - ISO 9249 73.9 HP

OPERATING SPECIFICATIONS

Rated Operating Capacity 1800 lb
Tipping Load 3600 lb
Breakout Force - Tilt Cylinder 5003 lb
Rated Operating Capacity with Optional Counterweight 2000 lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

WEIGHTS

Operating Weight 6567 lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

DIMENSIONS

Wheel Base 43.5 in
Height - Top of Cab 82 in
Vehicle Width over Tires 66 in
Ground Clearance 7.7 in
Departure Angle 26°
Maximum Dump Angle 48°
Maximum Reach - With Arms Parallel to Ground 53.3 in
Turning Radius from Center - Machine Rear 64.5 in
Bucket Pin Height - Maximum Lift 122.9 in
Length - Without Bucket 108.9 in
Rack Back Angle - Maximum Height 91°
Turning Radius from Center - Bucket 83 in
Turning Radius from Center - Coupler 51.8 in
Clearance at Maximum Lift and Dump 92.9 in
Reach - Maximum Lift/Dump 16 in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Bumper Overhang - Behind Rear Axle 40.2 in
Maximum Overall Height 156.6 in
Length - With Bucket on Ground 137.3 in
Bucket Pin Height - Carry Position 7.5 in

HYDRAULIC SYSTEM

Hydraulic Flow - Standard - Loader Hydraulic Flow 20 gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3335 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 39 HP
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 30 gal/min
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 58 HP

CAB

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

POWER TRAIN

Travel Speed - Forward or Reverse - Two Speed Option 10.6 mile/h
Travel Speed - Forward or Reverse - One Speed 7 mile/h

SERVICE REFILL CAPACITIES

Chain Box - Each Side 2.3 gal (US)
Cooling System 3.7 gal (US)
Engine Crankcase 3 gal (US)
Fuel Tank 24.8 gal (US)
Hydraulic System 13.2 gal (US)
Hydraulic Tank 10.3 gal (US)

NOISE LEVEL

Outside Cab** 101 dB(A)
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab* 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

AIR CONDITIONING SYSTEM (IF EQUIPPED)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.