CAT® D9R Track Type Tracktor

CAT® D9R Track Type Tracktor

Vendor
Caterpillar
ENQUIRE FOR PRICE
Sold out
Unit price
per 

ENGINE

Engine Model Cat® 3408C
Flywheel Power 302 kW
Bore 137 mm
Stroke 152 mm
Displacement 18 l
Net Power - SAE J1349/ISO 9249 302 kW
Engine Power - Net Power - SAE J1349/ISO 9249 302 kW
Engine Power - Gross Power - SAE J1995* 330 kW
Note (1) Capable of meeting U.S. EPA Tier 1 Equivalent.
Note (2) Engine ratings apply at 1,900 rpm.
Note (4) No derating required up to 2286 m (7,500 ft) altitude.
Engine Power - EU 80/1269 302 kW
Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note * Excludes all fan losses.
Emissions Optional U.S. EPA Tier 1 Equivalent

WEIGHTS

Operating Weight 48784 kg
Shipping Weight 36154 kg
Note (2) Shipping Weight: Includes clutch/brake arrangement, lubricants, coolant, 20% fuel and ROPS, FOPS cab and 610 mm (24 in) extreme service shoes.
Note (1) Operating Weight: Includes clutch/brake arrangement, lubricant, coolant, 100% fuel, hydraulic controls and fluids, 610 mm (24 in) extreme service shoes, SU-Blade, single-shank ripper, ROPS, FOPS cab and operator.

TRANSMISSION

1 Forward 3.9 km/h
2 Forward 6.8 km/h
3 Forward 11.9 km/h
1 Reverse 4.7 km/h
2 Reverse 8.4 km/h
3 Reverse 14.7 km/h
3 Forward - Drawbar Pull 218000 N
2 Forward - Drawbar Pull 400000 N
1 Forward - Drawbar Pull 725000 N

HYDRAULIC CONTROLS

Pump Type Piston-type geared from flywheel
Pump Output - Implement 239 l/min
Tilt Cylinder Flow - Rod End Flow 137 l/min
Tilt Cylinder Flow - Head End Flow 167 l/min
Bulldozer Relief Valve Setting 26200 kPa
Tilt Cylinder Relief Valve Setting 19300 kPa
Ripper - Lift - Relief Valve Setting 26200 kPa
Ripper - Pitch - Relief Valve Setting 26200 kPa
Note (1) Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Note (2) Complete system consists of pump, tank with filter, valves, lines, linkage and control levers.

UNDERCARRIAGE

Shoe Type Extreme Service
Width - Shoe 610 mm
Shoes/Side 43
Pitch 240 mm
Ground Clearance 596 mm
Track Gauge 2250 mm
Length - Track on Ground 3470 mm
Ground Contact Area 4.24 m²
Track Rollers/Side 8
Grouser Height - Extreme Service (ES) 84 mm
Note Positive Pin Retention Track.

SERVICE REFILL CAPACITIES

Fuel Tank 889 l
Cooling System 163 l
Engine Crankcase* 45.5 l
Power Train 164 l
Final Drive - Each 15 l
Roller Frames - Each 45 l
Pivot Shaft Compartment 30 l
Hydraulic Tank 77.2 l
Note * With oil filters.

BLADES - 9SU

Ground Clearance 1422 mm
Height 1934 mm
Weight* - Without Hydraulic Controls 6863 kg
Capacity - SAE J1265 13.5 m³
Total Operating Weight** - With Blade and Single-Shank Ripper 48784 kg
Width - Over End Bits 4310 mm
Digging Depth 606 mm
Maximum Tilt 940 mm
Note (1) * Includes blade tilt cylinder.
Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.

BLADES - 9U

Ground Clearance 1422 mm
Maximum Tilt 1014 mm
Width - Over End Bits 4650 mm
Weight* - Without Hydraulic Controls 7388 kg
Digging Depth 606 mm
Height 1934 mm
Total Operating Weight** - With Blade and Single-Shank Ripper 49392 kg
Capacity - SAE J1265 16.4 m³
Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Note (1) * Includes blade tilt cylinder.

RIPPERS - ADJUSTABLE PARALLELOGRAM+MULTI-SHANK

Number of Shank Holes 2
Overall Beam Width 1330 mm
Weight - With One Shank 4153 kg
Maximum Penetration Force - Shank Vertical 154 kN
Pry-Out Force - Multi-Shank Ripper with One Tooth 361 kN
Maximum Penetration - Standard Tip 798 mm
Total Operating Weight* - With SU-Blade and Ripper 48221 kg
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 879 mm
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2) +Includes (1) shank, add 347 kg for each additional shank.

RIPPERS - ADJUSTABLE PARALLELOGRAM SINGLE-SHANK STANDARD/DEEP

Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 882 mm/817 mm (34.7 in/32.2 in)
Total Operating Weight* - With SU-Blade and Ripper 48784 kg
Pry-Out Force 332 kN/331 kN (74,637 lbf/74,412 lbf)
Weight - With One Shank 4293 kg/4420 kg (9,464 lb/9,744 lb)
Number of Shank Holes 3-Mar
Maximum Penetration - Standard Tip 1231 mm/1727 mm (48.5 in/68 in)
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Overall Beam Width NA
Maximum Penetration Force - Shank Vertical 158 kN/172 kN (35,520 lbf/38,667 lbf)
Note (2) Single-shank ripping arrangement weight includes pin puller.

WINCHES

Winch Model PA140VS
Weight* 1790 kg
Oil Capacity 15 l
Increased Tractor Length 557 mm
Drum Width 320 mm
Wire Cable Diameter - Recommended 28 mm
Wire Cable Diameter - Optional 32 mm
Maximum Drum Capacity - Recommended Cable Length 78 m
Maximum Drum Capacity - Optional Cable Length 62 m
Wire Cable Ferrule Size - Outside Diameter 60 mm
Wire Cable Ferrule Size - Length 70 mm
Note (2) Variable speed, hydraulically driven, dual braking system, three?roller fairlead.
Note (1) * Weight: Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).

DIMENSIONS (APPROXIMATE)

Length - Basic Tractor - With Drawbar 5180 mm
Height - Top of Stack* 4005 mm
Track Gauge 2250 mm
Ground Clearance* 596 mm
Height - ROPS/Canopy* 4000 mm
Overall Length - Basic Tractor 4910 mm
Note (1) *Includes grouser height for total dimensions on hard surfaces.
Length - Track on Ground 3470 mm
Length - With U-Blade 6967 mm
Drawbar Height (Center of Clevis)* 765 mm
Length - With SU-Blade** 6880 mm
Overall Length - SU-Blade/SS Ripper 8230 mm
Width - Without Trunnions - Standard Shoe 2880 mm
Height - FOPS Cab* 3820 mm
Width - Over Trunnions 3300 mm
Length - With Multi-Shank Ripper 6538 mm
Length - With Single-Shank Ripper 6529 mm
Length - Basic Tractor - With Winch 5545 mm
Note (2) **Includes drawbar.

STANDARDS

Sound The declared dynamic operator sound pressure level is 85 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed.
ROPS ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Note Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.
FOPS FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
Brakes Brakes meet the standard ISO 10265.